1

So my print-scanner Samsung SCX-4300 is working fine through USB, and instead, I connected it with "Networking USB Server" like the following link:

https://es.aliexpress.com/item/Wavlink-USB-2-0-red-LRP-servidor-de-impresi-n-USB-Hub-100-Mbps-compartir-una/32933067390.html

Through the server, the print is working fine but scanner doesn't work, and I followed the instruction of Ubuntu's tutorial:

https://help.ubuntu.com/community/SaneDaemonTutorial?action=show&redirect=sane.d+tutorial

1. So I wrote on the terminal sudo service saned restart:

Failed to restart saned.service: unit saned.service is masked

2. Later, sudo service saned status:

● saned.service
   Active: inactive (dead)
   Loaded: masked (/dev/null; bad)

Then, I research on the internet, and I found this web: systemctl, how to unmask

3. file /lib/systemd/system/saned.service:

/lib/systemd/system/saned.service: symbolic lik to /dev/null

4. I typed to check sudo nano /run/systemd/generator.late/saned.service and I found that there was completely empty.

5. sudo rm /lib/systemd/system/saned.service and then, later, sudo systemctl daemon-reload

7. and finally, systemctl status saned:

● saned.service - LSB: SANE network scanner server
 Loaded: loaded (/etc/init.d/saned; generated)
 Active: failed (Result: exit-code) since Sun 2019-06-16 13:19:23 -05; 9min ago
 Docs: man:systemd-sysv-generator(8)
 Process: 923 ExecStart=/etc/init.d/saned start (code=exited, status=1/FAILURE)

jun 16 13:19:22 MS-7529 saned[923]: * Starting SANE network scanner server saned jun 16 13:19:23 MS-7529 saned[944]: saned (AF-indep+IPv6) from sane-backends 1.0.27 starting up jun 16 13:19:23 MS-7529 saned[944]: do_bindings: [1] bind failed: Address already in use jun 16 13:19:23 MS-7529 saned[944]: do_bindings: [0] bind failed: Address already in use jun 16 13:19:23 MS-7529 saned[944]: do_bindings: couldn't bind an address. Exiting. jun 16 13:19:23 MS-7529 saned[944]: FATAL ERROR; bailing out, waiting for children... jun 16 13:19:23 MS-7529 saned[944]: bail_out: all children exited jun 16 13:19:23 MS-7529 systemd[1]: saned.service: Control process exited, code=exited status=1 jun 16 13:19:23 MS-7529 systemd[1]: saned.service: Failed with result 'exit-code'. jun 16 13:19:23 MS-7529 systemd[1]: Failed to start LSB: SANE network scanner server.

8: So I went to check again sudo nano /run/systemd/generator.late/saned.service:

# Automatically generated by systemd-sysv-generator

[Unit] Documentation=man:systemd-sysv-generator(8) SourcePath=/etc/init.d/saned Description=LSB: SANE network scanner server Before=multi-user.target Before=multi-user.target Before=multi-user.target Before=graphical.target After=remote-fs.target After=dbus.service After=avahi-daemon.service

[Service] Type=forking Restart=no TimeoutSec=5min IgnoreSIGPIPE=no KillMode=process GuessMainPID=no RemainAfterExit=yes SuccessExitStatus=5 6 ExecStart=/etc/init.d/saned start ExecStop=/etc/init.d/saned stop

9. I typed again sudo service saned status:

● saned.service - LSB: SANE network scanner server
Loaded: loaded (/etc/init.d/saned; generated)
Active: failed (Result: exit-code) since Sun 2019-06-16 13:19:23 -05; 1h 20min ago
Docs: man:systemd-sysv-generator(8)
Process: 923 ExecStart=/etc/init.d/saned start (code=exited, status=1/FAILURE)

jun 16 13:19:22 MS-7529 saned[923]: * Starting SANE network scanner server saned jun 16 13:19:23 MS-7529 saned[944]: saned (AF-indep+IPv6) from sane-backends 1.0.27 starting up jun 16 13:19:23 MS-7529 saned[944]: do_bindings: [1] bind failed: Address already in use jun 16 13:19:23 MS-7529 saned[944]: do_bindings: [0] bind failed: Address already in use jun 16 13:19:23 MS-7529 saned[944]: do_bindings: couldn't bind an address. Exiting. jun 16 13:19:23 MS-7529 saned[944]: FATAL ERROR; bailing out, waiting for children... jun 16 13:19:23 MS-7529 saned[944]: bail_out: all children exited jun 16 13:19:23 MS-7529 systemd[1]: saned.service: Control process exited, code=exited status=1 jun 16 13:19:23 MS-7529 systemd[1]: saned.service: Failed with result 'exit-code'. jun 16 13:19:23 MS-7529 systemd[1]: Failed to start LSB: SANE network scanner server.

I couldn't find how to fix to connect scanner through the server.

So does anyone know how to fix this failure?

0 Answers0