1

I try to connect Xbox one via Bluetooth adapter on my PC but before I get any problems (as usual) with the connection I have problems with even enabling Bluetooth: the button is 'off' and locked to change it. sorry for Russian

I tried a lot. First of all I get xpadneo, done this:

sudo apt install sysfsutils
sudo nano /etc/sysfs.conf

Placed the following at the end of the file. "/module/bluetooth/parameters/disable_ertm=1"

Tried solution here: ubuntu 18.04 LTS bluetooth [0cf3:3004] discovery not working

Tried sudo rfkill unblock bluetooth

Install bluez and some other stuff. Nothing helps.

bluetoothctl - not responding

pruntoff@samus:~$ bluetoothctl
Waiting to connect to bluetoothd...

Some commands:

pruntoff@samus:~$ lspci -knn | grep Net -A3; lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 045e:02fe Microsoft Corp. 
Bus 003 Device 002: ID 1a81:1004 Holtek Semiconductor, Inc. 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


pruntoff@samus:~$ dmesg | grep -i blue
[   93.896221] audit: type=1107 audit(1572797372.145:56): pid=803 uid=106 auid=4294967295 ses=4294967295 msg='apparmor="DENIED" operation="dbus_method_call"  bus="system" path="/" interface="org.freedesktop.DBus.ObjectManager" member="GetManagedObjects" mask="send" name="org.bluez" pid=2034 label="snap.chromium.chromium"

rfkill is installed but returns nothing.

I'm 64bit PC Intel® Core™ i5-4460 CPU @ 3.20GHz × 4 GNOME 3.28.2

pruntoff@samus:~$ uname -r
4.15.0-66-generic

Thanks in advance!

UPD: Some more commands:

pruntoff@samus:~$ sudo systemctl status bluetooth.service
● bluetooth.service - Bluetooth service
   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset
   Active: inactive (dead)
     Docs: man:bluetoothd(8)

UPD2: Yep, it is external, just dongle. Requested outputs:

pruntoff@samus:~$ dmesg | tail
[ 2493.764744] usb 3-4: Product: XBOX ACC
[ 2493.764747] usb 3-4: Manufacturer: Microsoft Inc.
[ 2493.764750] usb 3-4: SerialNumber: 140770
[ 2501.628448] usb 3-4: USB disconnect, device number 5
[ 2519.475760] usb 3-4: new high-speed USB device number 6 using xhci_hcd
[ 2519.625396] usb 3-4: New USB device found, idVendor=045e, idProduct=02fe
[ 2519.625401] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2519.625404] usb 3-4: Product: XBOX ACC
[ 2519.625407] usb 3-4: Manufacturer: Microsoft Inc.
[ 2519.625409] usb 3-4: SerialNumber: 140770

Seem it do not find drivers...

pruntoff@samus:~$ usb-devices
    ...
    T:  Bus=03 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#=  6 Spd=480 MxCh= 0
    D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
    P:  Vendor=045e ProdID=02fe Rev=01.00
    S:  Manufacturer=Microsoft Inc.
    S:  Product=XBOX ACC
    S:  SerialNumber=140770
    C:  #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
    I:  If#= 0 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
    ...
Pruntoff
  • 111

1 Answers1

0

When you use BlueZ you must use its controls and settings, not the built in ones.

Liam Proven
  • 566
  • thanks a lot. I can figure out how to start BlueZ controls and it looks like it does not see any adapters as well. – Pruntoff Nov 03 '19 at 18:22
  • Hmm. You might need to disable bluetoothd or something as well, in case it's claiming the hardware and BlueZ therefore can't "see" the adaptor. I'm afraid that I sold the 1 laptop on which I needed to use BlueZ, so I can't test this easily. – Liam Proven Nov 04 '19 at 14:54
  • You also might need some GNOME extension to show "legacy" icons, such as "Tray Icons", to get the BlueZ icon to show. I only used it on Unity, not GNOME 3, as I do not like or use GNOME 3. – Liam Proven Nov 04 '19 at 14:56