RTL8811AU install on 19.10 fails

Asked Jan 27 '20 at 23:45

Active May 07 '20 at 10:07

Viewed 1,466 times

I recently purchased Netgear AC600 dual band (USB ID-0846-9052, RTL8811AU) and tried installing wireless driver on my Ubuntu 19.10 machine. Almost most of the threads in GitHub are based on rtl8812au even though I tried the following steps.

sudo apt update
sudo apt install git
git clone https://github.com/gnab/rtl8812au.git
sudo dkms add ./rtl8812au
sudo dkms build rtl8812au/4.2.2
sudo dkms install rtl8812au/4.2.2
sudo modprobe rtl8812au

I've been trying the wrong version, and haven't found the current version yet.

edited Jan 28 '20 at 00:33

karel

114,770

asked Jan 27 '20 at 23:45

air2data

2

Does this answer your question? Driver rtl8811au for usb wifi – K7AAY Jan 27 '20 at 23:58
I did . "sudo ./dkms-install.sh " command not found. – air2data Jan 28 '20 at 06:44
Does this answer your question? Need rtl8814au driver for kernel 5.3 on Ubuntu 19.10 – Jeremy31 Jan 28 '20 at 12:32
If you are sure that your chipset is of rtl8811au then try the 1st one or else if its 8812au then try 2nd. 1) https://github.com/sloretz/rtl8811au 2) https://github.com/aircrack-ng/rtl8812au – vishal Feb 03 '20 at 09:53

RTL8811AU install on 19.10 fails

0 Answers0