1

screenshot as:

hardware

and:

resolution

However, that resolution is woefully low. How is a higher resolution selected?

Previously, rebooting fixed the resolution problem. Now, it's stuck at the "highest" resolution which is far lower than the resolution yesterday.


In the context of generally troubleshooting Wayland, for this given graphics card:

nicholas@mordor:~$ 
nicholas@mordor:~$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
nicholas@mordor:~$ 
nicholas@mordor:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:    Ubuntu 22.04 LTS
Release:    22.04
Codename:   jammy
nicholas@mordor:~$ 

How would I determine the resolution it's detecting as available for a given monitor?

nicholas@mordor:~$ 
nicholas@mordor:~$ hwinfo --short
cpu:                                                            
                       Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz, 3280 MHz
                       Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz, 3275 MHz
                       Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz, 3275 MHz
                       Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz, 3247 MHz
keyboard:
  /dev/input/event3    Colorado HP Wired Desktop 320K Keyboard
mouse:
  /dev/input/mice      SiGma Micro Usb Mouse
monitor:
                       DELL E2422H
graphics card:
                       Intel 2nd Generation Core Processor Family Integrated Graphics Controller
sound:
                       Intel 6 Series/C200 Series Chipset Family High Definition Audio Controller
storage:
                       Intel SATA Controller [RAID mode]
network:
  eno1                 Intel 82579LM Gigabit Network Connection (Lewisville)
network interface:
  lxcbr0               Ethernet network interface
  lo                   Loopback network interface
  eno1                 Ethernet network interface
  virbr0               Ethernet network interface
  docker0              Ethernet network interface
disk:
  /dev/sda             WDC WD2500AAKS-0
partition:
  /dev/sda1            Partition
  /dev/sda2            Partition
  /dev/sda3            Partition
  /dev/sda4            Partition
  /dev/sda5            Partition
cdrom:
  /dev/sr0             TSSTcorp DVD-ROM TS-H353C
usb controller:
                       Intel 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2
                       Intel 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1
bios:
                       BIOS
bridge:
                       Intel 6 Series/C200 Series Chipset Family PCI Express Root Port 1
                       Intel Q67 Express Chipset LPC Controller
                       Intel 82801 PCI Bridge
                       Intel 2nd Generation Core Processor Family DRAM Controller
                       Intel 6 Series/C200 Series Chipset Family PCI Express Root Port 3
hub:
                       Intel Integrated Rate Matching Hub
                       Linux Foundation 2.0 root hub
                       Intel Integrated Rate Matching Hub
                       Linux Foundation 2.0 root hub
memory:
                       Main Memory
unknown:
                       FPU
                       DMA controller
                       PIC
                       Keyboard controller
  /dev/lp0             Parallel controller
                       Intel 6 Series/C200 Series Chipset Family MEI Controller #1
                       Intel 6 Series/C200 Series Chipset Family SMBus Controller
                       Intel 6 Series/C200 Series Chipset Family KT Controller
                       Serial controller
  /dev/input/event5    Colorado HP Wired Desktop 320K Keyboard
nicholas@mordor:~$ 
nicholas@mordor:~$ hwprobe=bios.ddc.ports=4 hwinfo --monitor
16: None 00.0: 10000 Monitor                                    
  [Created at monitor.125]
  Unique ID: rdCR.cKFyiqA6N1F
  Parent ID: _Znp.xFWE_t6aB6C
  Hardware Class: monitor
  Model: "DELL E2422H"
  Vendor: DEL "DELL"
  Device: eisa 0xf136 "DELL E2422H"
  Serial ID: "B6VFTK3"
  Resolution: 720x400@70Hz
  Resolution: 640x480@60Hz
  Resolution: 640x480@75Hz
  Resolution: 800x600@60Hz
  Resolution: 800x600@75Hz
  Resolution: 1024x768@60Hz
  Resolution: 1024x768@75Hz
  Resolution: 1280x1024@75Hz
  Resolution: 1152x864@75Hz
  Resolution: 1280x1024@60Hz
  Resolution: 1600x900@60Hz
  Resolution: 1920x1080@60Hz
  Size: 527x296 mm
  Year of Manufacture: 2021
  Week of Manufacture: 52
  Detailed Timings #0:
     Resolution: 1920x1080
     Horizontal: 1920 2008 2052 2200 (+88 +132 +280) +hsync
       Vertical: 1080 1084 1089 1125 (+4 +9 +45) +vsync
    Frequencies: 148.50 MHz, 67.50 kHz, 60.00 Hz
  Driver Info #0:
    Max. Resolution: 1920x1080
    Vert. Sync Range: 50-75 Hz
    Hor. Sync Range: 30-83 kHz
    Bandwidth: 148 MHz
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #14 (VGA compatible controller)
nicholas@mordor:~$ 

(Wasn't sure on the syntax using hwinfo to get more info on the graphics card or above monitor.)

Somewhat random info from a Fedora guide and an online man page, but I'm more interested in how Wayland uses this information.

Archisman Panigrahi
  • 28,338
  • 18
  • 105
  • 212
  • 1
    Can you try switching to X.Org? https://askubuntu.com/q/1410256/124466 Wayland does not support some older graphics processors that well. – Archisman Panigrahi May 06 '23 at 21:42
  • if I stick with Wayland, are there steps that I can take with Wayland? – Nicholas Saunders May 06 '23 at 22:49
  • 1
    I don't know. Is there any particular reason you want to use Wayland? It has better support for touch screens, but otherwise, Wayland is overkill. Wayland still has a lot of bugs, and does not support older graphics chipsets very well. Can you confirm whether switching to X.Org helps? – Archisman Panigrahi May 06 '23 at 23:11
  • I didn't know that about Wayland @ArchismanPanigrahi so I'll look into how to switch. The nth reboot has fixed whatever the problem is -- at least for now. – Nicholas Saunders May 08 '23 at 17:21

0 Answers0