Huawei E353 USSD Codes and Message?

Question

I am using this device.

Bus 002 Device 005: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard

But , i am unable to send and receive messages. And how do i use USSD Code? Modem works fine on 3g networks.

Only i am not able to check my usage via USSD Codes.

I have treid using Gammu But it is not recognizing my modem.

Web-E · Answer 1 · 2012-08-09T14:22:09.653

3

GSM-USSD is an utility that enable you to send USSD codes via modem.

You need to configure it correctly. Here is thread that gives idea about configuration.

Read post #13 also

You can try with sudo gsm-ussd *123# or

According to the post A execution command would be

sudo gsm-ussd *123# -m /dev/`dmesg | grep "usb 1-3" | tail -n 1 -c 8`

Where *123# is your ussd command.

edited Aug 09 '12 at 14:22

answered Aug 09 '12 at 10:49

Web-E

But it doesn't even detect my modem. How will it work then? – BigSack Aug 09 '12 at 12:05
you said your modem is working fine!! modem will be represented under /dev/ttyUSB0 - /dev/ttyUSB3 you need to issue command as in post 13 – Web-E Aug 09 '12 at 12:07
It will be better if you pull it off and reconnect. Sometime the utility fails after you connect to internet. :( – Web-E Aug 09 '12 at 12:08
How do i find the port , for issuing command? – BigSack Aug 09 '12 at 14:14
post 13 command will do that for you. See a sample command. I have updated the post – Web-E Aug 09 '12 at 14:20

1 Answers1