Nvidia-current drivers enabled, not in use?? help

Question

Possible Duplicate:
Nvidia driver activated but currently not in use

lshw -C Video

*-display               
description: VGA compatible controller
product: G96 [GeForce 9600M GS]
vendor: nVidia Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=0
resources: irq:16 memory:fc000000-fcffffff memory:d0000000-dfffffff memory:fa000000-fbffffff ioport:cc00(size=128) memory:fd000000-fd07ffff

lspci -k

01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9600M GS] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 1892
Kernel driver in use: nvidia
Kernel modules: nvidia-current, nouveau, nvidiafb

jockey-text -l

xorg:nvidia_173 - NVIDIA accelerated graphics driver (Proprietary, Disabled, Not in use)
xorg:nvidia_current - NVIDIA accelerated graphics driver (Proprietary, Enabled, Not in use)

cat /etc/X11/xorg.conf

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 270.29  (buildd@roseapple)  Fri Feb 25 14:43:24 UTC 2011

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Seiko/Epson"
    HorizSync       30.0 - 75.0
    VertRefresh     60.0
    Option         "DPMS"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "ViewSonic VA2323wm"
    HorizSync       24.0 - 82.0
    VertRefresh     50.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 9600M GS"
    BusID          "PCI:1:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 9600M GS"
    BusID          "PCI:1:0:0"
    Screen          1
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "CRT: nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Any other information needed will be gladly added as requested.

Have you tried sudo nvidia-xconfig? Note: This isn't working for me on a fresh 11.04 install. I'm having the problem discussed at this Ubuntu Forum post It's not clear to me if you're having the same problem. — Mike B, Sep 08 '11 at 19:50

Nvidia-current drivers enabled, not in use?? help

0 Answers0