8

it is possible to make a full disk image with running ubuntu with following command:

dd if=/dev/sda of=/image_name

After i make it, how can i restore that image on a crushed system?

Alexander Kim
  • 1,290
  • 3
    Three things I would suggest. One: do it from a live CD. Two: make sure the image you create is not on the same volume as the one being copied. Three: this will probably only work if both hard drives are the same size. – zeitue Aug 11 '14 at 05:54
  • How can i do that from liveCD? AFAIK from liveCD you can't do any write actions. – Alexander Kim Aug 11 '14 at 06:39
  • @Heihachi why would you not be able to write to a harddisk from a live DVD? – Rinzwind Aug 11 '14 at 07:34
  • 1
    I would suggest using a USB hard drive as the location to sent the image – zeitue Aug 11 '14 at 08:14

2 Answers2

18

Boot from the live cd. Mount your destination media to (say) /mnt.

dd if=/dev/sdXXX of=/mnt/mybackup.ddimg

To restore:

dd if=/mnt/mybackup.ddimg of=/dev/sdXXX

The destination drive should be the same size or bigger than the original.

A better way is using tar.

Mount the source to /mnt, mount the destination to /home (say)

tar cvfpz /home/mybackup.tar.gz /mnt

This can then be restored to any size drive:

tar xvfpz /home/mybackup.tar.gz

(After mounting source to /home and destination to /mnt.)

Then just install grub.

Addison
  • 306
hatterman
  • 2,280
  • 2
  • 22
  • 33
6

In addition to hatterman's great answer you can compress the image as it's taken using gzip like this:

dd if=/dev/sdx | gzip > /mnt/mybackup.ddimg.gz
Kristopher Ives
  • 5,509