0

I have read through questions concerning installing driver for this wireless adapter, and found that the driver is closely dependent on the details of each adapter, thus I post my adapter here and ask for specific instructions. If further information is needed, please let me know, thanks!

I just followed the answer provided by Ben Lee in How can I get a Belkin N600 DB (F9L1101v1) to work on Ubuntu 12,04 64-Bit to try installing the driver. Every step is successfully done except for the last step, where I enhanced it with sudo modprobe 8192du. I then restarted the computer, but it seems it does not work. Even the light on the Belkin adapter is not turned on (in Windows, the light labelled with ((|)) will be on to show that it is at least working). Thanks for further help!

lsusb gives the following information,

$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 3938:1031  
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 050d:615a Belkin Components F7D4101 / F9L1101 802.11abgn Wireless Adapter [Broadcom BCM4323]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Zanna
  • 70,465
bsmile
  • 31
  • 7

1 Answers1

0

It seems we must use ndiswrapper to install the driver. The answer provided by Ben Lee in How can I get a Belkin N600 DB (F9L1101v1) to work on Ubuntu 12,04 64-Bit does not work for my case.

Community
  • 1
bsmile
  • 31
  • 7