How to start lightdm services at startup

Question

My system is running Ubuntu 15.04 and I've changed default boot to "text" instead of "quiet splash" by going through answer by @Bruno Pereira How do I disable X at boot time so that the system boots in text mode?.However again I've changed default boot to quiet splash and update-grub but as Ubuntu 15.04 uses systemd my system does not boot to graphical login and stuck at Ubuntu Logo screen.I've to go to the tty1 terminal by CTRL+ALT+F1 and manullay starts Lightdm services as sudo service lightdm start on every login.

How should I change my boot to Graphical login i.e "quiet splash"? content of sudo gedit /etc/default/grub

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT="quiet splash"
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX="quiet splash"

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=1920x1080

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

have you tried update-grub2 ? I think it should back to default conf when you update it, no need to define lightdm on startup, also check your ubuntu-session. — sugab, May 17 '15 at 10:18

A.B. · Answer 1 · 2015-05-17T18:22:38.257

5

First run this command for a graphical environment

sudo systemctl set-default graphical.target

Because you have used sudo systemctl set-default multi-user.target before.

Then repair the entries in /etc/default/grub

This statement is completely wrong:

GRUB_DEFAULT="quiet splash"

Open the configuration:

sudo nano /etc/default/grub

and replace the entry

GRUB_DEFAULT="quiet splash"

with

GRUB_DEFAULT=0

add the entry

GRUB_CMDLINE_LINUX="quiet splash"

After that run

sudo update-grub

GRUB_DEFAULT

The default menu entry. This may be a number, in which case it identifies the Nth entry in the generated menu counted from zero, or the title of a menu entry, or the special string ‘saved’. Using the title may be useful if you want to set a menu entry as the default even though there may be a variable number of entries before it.
GRUB_CMDLINE_LINUX

Command-line arguments to add to menu entries for the Linux kernel.
GRUB_CMDLINE_LINUX_DEFAULT

Unless ‘GRUB_DISABLE_RECOVERY’ is set to ‘true’, two menu entries will be generated for each Linux kernel: one default entry and one entry for recovery mode. This option lists command-line arguments to add only to the default menu entry, after those listed in ‘GRUB_CMDLINE_LINUX’.

_Source

edited May 17 '15 at 18:22

answered May 17 '15 at 10:58

A.B.

90,397

It is not working – Mudit Kapil May 17 '15 at 12:20
without quiet splash it is booting in to command-line – Mudit Kapil May 17 '15 at 12:21
Therefore GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" – A.B. May 17 '15 at 12:53
That seems to be an other problem. – A.B. May 17 '15 at 12:54
Try a sudo apt-get install --reinstall – A.B. May 17 '15 at 13:09
@A.B. I think the problem with sudo systemctl enable multi-user.target --force; sudo systemctl set-default multi-user.target see Bruno's answer. OP has 15.04 with systemd. There should be a command to reverse that. – user.dz May 17 '15 at 15:01
@Sneetsher this is a good point. – A.B. May 17 '15 at 15:07
@A.B. after running sudo systemctl set-default graphical.target and grub changes and update-grub i am able to boot in to GUI but not able to drop any terminal tty1to tty6 and boot process is not default Ubuntu logo boot but from texttologin-screen – Mudit Kapil May 17 '15 at 17:57
@A.B. yes when i set GRUB_CMDLINE_LINUX="quiet splash" it is booting normally instead of replacing – Mudit Kapil May 17 '15 at 18:01
@A.B. after some failed kernel module it boots normally – Mudit Kapil May 17 '15 at 18:07
@A.B. however it is some workaround and not a solution so upvoted it but not accepted thanks for your effort – Mudit Kapil May 17 '15 at 18:09
Try a sudo systemctl enable serial-getty@.service – A.B. May 17 '15 at 18:21
@A.B. Tried sudo systemctl enable serial-getty@.service – Mudit Kapil May 18 '15 at 16:27

Cam T · Answer 2 · 2017-02-01T03:53:04.590

It depends on why it doesn't start as a default option. I accidentally purge systemd, so when I reinstall and boot I just have the TTY prompt.

First, you haver to start the service so you can do it graphical:

sudo start lightdm

Once you are in gui mode type in the terminal to reconfigure lightdm:

sudo dpkg-reconfigure lightdm

sudo systemctl set-default graphical.target

Now we need to update the grub so lightdm start a default service

init=/lib/systemd/systemd

To boot under systemd by default, edit /etc/default/grub and change the following line:

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash init=/lib/systemd/systemd"

After modifying any grub related configuration files like /etc/default/grub the following command is needed to bring the changes into effect.

update-grub

You can see all the instructions in the official ubuntu wiki here, systemd is a services administrator so you will find quite functional

How to start lightdm services at startup

2 Answers2

Linked