22

I want to know how can I only capture desktop audio (means no mic!).

I am using this command:

$ ffmpeg -f x11grab -s 1360x768 -r 30 -i :0.0 -preset ultrafast ~/Videos/out.mp4
ffmpeg version 2.4.3-1ubuntu1~trusty6 Copyright (c) 2000-2014 the FFmpeg developers
  built on Nov 22 2014 17:07:19 with gcc 4.8 (Ubuntu 4.8.2-19ubuntu1)
  configuration: --prefix=/usr --extra-version='1ubuntu1~trusty6' --build-suffix=-ffmpeg --toolchain=hardened --extra-cflags= --extra-cxxflags= --libdir=/usr/lib/x86_64-linux-gnu --shlibdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --enable-gpl --enable-shared --disable-stripping --enable-avresample --enable-avisynth --enable-fontconfig --enable-gnutls --enable-ladspa --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libflite --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libmodplug --enable-libmp3lame --enable-libopenjpeg --enable-libopus --enable-libpulse --enable-librtmp --enable-libschroedinger --enable-libshine --enable-libspeex --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-opengl --enable-x11grab --enable-libxvid --enable-libx265 --enable-libdc1394 --enable-libiec61883 --enable-libzvbi --enable-libzmq --enable-frei0r --enable-libx264 --enable-libsoxr --enable-openal --enable-libopencv
  libavutil      54.  7.100 / 54.  7.100
  libavcodec     56.  1.100 / 56.  1.100
  libavformat    56.  4.101 / 56.  4.101
  libavdevice    56.  0.100 / 56.  0.100
  libavfilter     5.  1.100 /  5.  1.100
  libavresample   2.  1.  0 /  2.  1.  0
  libswscale      3.  0.100 /  3.  0.100
  libswresample   1.  1.100 /  1.  1.100
  libpostproc    53.  0.100 / 53.  0.100
[x11grab @ 0x16051e0] device: :0.0 -> display: :0.0 x: 0 y: 0 width: 1360 height: 768
[x11grab @ 0x16051e0] shared memory extension found
Input #0, x11grab, from ':0.0':
  Duration: N/A, start: 1444234613.435347, bitrate: 1002700 kb/s
    Stream #0:0: Video: rawvideo (BGR[0] / 0x524742), bgr0, 1360x768, 1002700 kb/s, 30 tbr, 1000k tbn, 30 tbc
File '/home/elderzz/Videos/out.mp4' already exists. Overwrite ? [y/N] ^A

I can capture mic with another app, but I need the mic audio to be in a different file. I only want to capture desktop audio!

llogan
  • 11,868
Elderzz
  • 451

2 Answers2

25

pavucontrol

enter image description here

  1. Install pavucontrol.
  2. Start recording with ffmpeg (see example commands below).
  3. Start pavucontrol.
  4. Go to the Recording tab and you'll find ffmpeg or Lavf56.15.102 (or similar) listed there.
  5. Change audio capture from Internal Audio Analog Stereo to Monitor of Internal Audio Analog Stereo.

Now it should record system and application audio instead of the microphone.

This setting will be remembered. The next time you want to capture with ffmpeg, it will automatically start recording system audio. If you want to revert this, use pavucontrol again to change back to microphone input.

The text above was adapted from HOWTO: Screencasting on Linux.

example ffmpeg commands

audio only

ffmpeg -f pulse -i default output.wav

with screen capture

ffmpeg -f x11grab -video_size 1360x768 -framerate 30 -i :0.0 -f pulse -i default -preset ultrafast -crf 18 -pix_fmt yuv420p out.mkv
llogan
  • 11,868
  • Will this recording be lossless? – Anmol Singh Jaggi Jun 21 '16 at 19:38
  • @AnmolSinghJaggi No. -crf 18 is lossy, and there is also loss due to RGB to YUV 4:2:0 colorspace conversion. – llogan Jun 21 '16 at 20:33
  • No I was talking about the audio only part. – Anmol Singh Jaggi Jun 21 '16 at 21:13
  • 1
    @AnmolSinghJaggi Yes, the audio should be lossless. – llogan Jun 21 '16 at 21:52
  • How to stop the recording? q or Ctrl-C is not working. – Anmol Singh Jaggi Oct 12 '17 at 17:08
  • @AnmolSinghJaggi It should be working. Try kill -s SIGINT $(pgrep ffmpeg). – llogan Oct 12 '17 at 18:45
  • 10
    If you do not want to switch the source manually, you can use the command pactl list soruces to figure out the internal name of the monitor source and then use -f pulse -i NAME instead of default, e.g. -f pulse -i alsa_output.pci-0000_00_1f.3.analog-stereo.monitor The exact name will differ from system to system. – regnarg Apr 03 '20 at 14:33
  • @regnarg After I record using -i alsa_output.pci-0000_00_1f.3.analog-stereo.monitor (it is same for my system) when I play the output using mpv I get Audio device underrun detected. And there's no audio output (Played a song in the background) – Phani Rithvij May 29 '20 at 11:53
  • Is there anyway that we can record system default output audio device on MacOS? I mean using commands or programatically. – Muhammad Aug 15 '23 at 04:39
1

You can also record to compressed MP3 (with a bit rate of your choice) such as:

ffmpeg -f alsa -ac 2 -i default -acodec libmp3lame -ab 320k ouput.mp3
Eric Carvalho
  • 54,385
sergy8612
  • 11