16

I have two gpus on my machine:

$ lspci | grep VGA
01:00.0 VGA compatible controller: NVIDIA Corporation GM200 [GeForce GTX 980 Ti] (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 730] (rev a1)

I wanna use the first gpu for computation, so I need it free. However the X server is running on the first one by default which costs %2 to %10 of the gpu capacity.

How can I move the X server to the second gpu?

MBZ
  • 359

4 Answers4

9

OK, I figured it out.

First try creating an xorg config using the following command:

sudo nvidia-xconfig

this will create a new xorg config at /etc/X11/xorg.conf.

then change the device section to look something like below:

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BusID          "PCI:2:0:0"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device1"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

IMPORTANT: make sure your monitor is connected to the second GPU. reboot and voila!

MBZ
  • 359
  • 2
    following this approach on Ubuntu 20.04 caused my Ubuntu to not be able to login until I deleted the xorg.conf file. – Bilal Jun 27 '23 at 15:23
6

I have two GPUs. Here is what I did to set the GPU2 for display:

To get PCI in hex format, use:

lspci | grep VGA

For me, it returns:

05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b02 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation GM200 [GeForce GTX TITAN X] (rev a1)

So, in my case it is 09:00.0 for the GPU I wish to use for display (GPU2). I then generated the /etc/X11/xorg.conf using sudo nvidia-xconfig.

this will create a new xorg config at /etc/X11/xorg.conf.

Then I only added the BusID line in the following part of the file /etc/X11/xorg.conf:

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BusID          "PCI:9:0:0"
EndSection

I then restarted the computer and connected the monitors to the GPU2. After this few of the USB ports stopped working but others were fine to be used for keyboard and mouse.

user2807033
  • 71
2

In addition, I wanted the default boot to be a specific card also.

Rather than messing with xorg files, I simply opened the case and switched the graphic card I wanted as default into the slot currently occupied by GPU-0

After boot, the card came up as GPU-0 and as the default with no further config required.

Duane
  • 121
  • 3
  • You were lucky, usually one can't swap cards because new cards are "fat" and long and cover other slots :( – Alex Mar 24 '24 at 12:18
1

The above answer is quite working except the exact number of "Bus ID."

In my case (Xubuntu 18.04, Kubuntu 20.04), the result of "lspci" was different from the Bus ID shown in "nvidia-settings," and the correct Bus ID was the one on the nvidia-settings.

If you set the wrong pci number as Bus ID, then you will see the black screen only.

DJ4seasons
  • 11
  • 1