I updated my Lubuntu 16.04 to 17.04 and it is now not connecting to my WiFi. It is detecting the signal, but doesn't want to connect. I deleted the connection and then tried to reconnect to the network but it has not helped.
Any ideas?
See below for info:
*-network
description: Ethernet interface
product: 82567LM-3 Gigabit Network Connection
vendor: Intel Corporation
physical id: 19
bus info: pci@0000:00:19.0
logical name: enp0s25
version: 02
serial: 00:26:55:46:a4:53
size: 100Mbit/s
capacity: 1Gbit/s
width: 32 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k duplex=full firmware=0.4-3 ip=192.168.0.16 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s
resources: irq:30 memory:f0500000-f051ffff memory:f0525000-f0525fff ioport:1100(size=32)
*-network
description: Wireless interface
physical id: 1
bus info: usb@1:5
logical name: wlx74da388862b7
serial: be:1b:f1:30:ab:b5
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=rtl8xxxu driverversion=4.10.0-19-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11
and this:
Bus 001 Device 002: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
The Wireless Info Script result can be found here: http://paste.ubuntu.com/24395115/
Thanks in advance!
rfkillcommand is unavailable on your system. Could you please reinstall it (sudo apt-get install --reinstall rfkill) and [edit] your question to include the output ofsudo rfkill list? If you can't get internet via Ethernet and don't know how to install packages without an internet connection you're welcome to ask for help. Thanks. – David Foerster Apr 17 '17 at 19:53