My graphics card is GT 710. I've installed it, physically, correctly. However lspci -v
doesn't show Nvidia graphics card anywhere. Here is the output (only entries since details are ommited due to length):
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
00:1c.4 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 5 (rev 02) (prog-if 00 [Normal decode])
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
I also tried lspci | grep 3D
and it returns nothing.
lspci | grep VGA
only shows Intel Corporation 4 Series ...
, which is the default onboard graphics:
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
Though, I went on and tried installing drivers. I followed the instructions in How do I install the Nvidia drivers?, installing nvidia-381, which is the lastest driver. After installing I opened Nvidia X Server Settings
but there was no PRIME profiles
, despite nvidia-prime
being installed automatically alongside nvidia-381
and bumblebee
removed.
sudo nvidia-xconfig
returned this:
WARNING: Unable to locate/open X configuration file.
Package xorg-server was not found in the pkg-config search path.
Perhaps you should add the directory containing `xorg-server.pc'
to the PKG_CONFIG_PATH environment variable
No package 'xorg-server' found
New X configuration file written to '/etc/X11/xorg.conf'
I tried re-installing xorg
and openbox
but nothing changed.
I searched for problems of installed drivers and tried this Nvidia drivers installed, but not used. I executed sudo update-alternatives --config x86_64-linux-gnu_gl_conf
:
There are 3 choices for the alternative x86_64-linux-gnu_gl_conf (providing /etc/ld.so.conf.d/x86_64-linux-gnu_GL.conf).
Selection Path Priority Status
------------------------------------------------------------
0 /usr/lib/nvidia-381/ld.so.conf 8604 auto mode
1 /usr/lib/nvidia-381-prime/ld.so.conf 8603 manual mode
2 /usr/lib/nvidia-381/ld.so.conf 8604 manual mode
* 3 /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf 500 manual mode
Press <enter> to keep the current choice[*], or type selection number:
changed choice to 0
, which is /usr/lib/nvidia-381/ld.so.conf
. However after reboot the choice was back to /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
again. I think there are many problems but these can be traced to the fact that Ubuntu doesn't detect the graphics card.
If you have any idea I would really appreciate.
Edit: Here is the full result of lspci -v
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
Subsystem: Hewlett-Packard Company 4 Series Chipset DRAM Controller
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company 4 Series Chipset Integrated Graphics Controller
Flags: bus master, fast devsel, latency 0, IRQ 32
Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 1230 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
Subsystem: Hewlett-Packard Company 4 Series Chipset Integrated Graphics Controller
Flags: bus master, fast devsel, latency 0
Memory at f0400000 (64-bit, non-prefetchable) [disabled] [size=1M]
Capabilities: <access denied>
00:03.0 Communication controller: Intel Corporation 4 Series Chipset HECI Controller (rev 03)
Subsystem: Hewlett-Packard Company 4 Series Chipset HECI Controller
Flags: bus master, fast devsel, latency 0, IRQ 33
Memory at f052a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:03.2 IDE interface: Intel Corporation 4 Series Chipset PT IDER Controller (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company 4 Series Chipset PT IDER Controller
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 18
I/O ports at 1238 [size=8]
I/O ports at 1260 [size=4]
I/O ports at 1240 [size=8]
I/O ports at 1264 [size=4]
I/O ports at 1220 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_generic
Kernel modules: pata_acpi
00:03.3 Serial controller: Intel Corporation 4 Series Chipset Serial KT Controller (rev 03) (prog-if 02 [16550])
Subsystem: Hewlett-Packard Company 4 Series Chipset Serial KT Controller
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
I/O ports at 1248 [size=8]
Memory at f0524000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82567LM-3 Gigabit Network Connection (rev 02)
Subsystem: Hewlett-Packard Company 82567LM-3 Gigabit Network Connection
Flags: bus master, fast devsel, latency 0, IRQ 30
Memory at f0500000 (32-bit, non-prefetchable) [size=128K]
Memory at f0525000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 1100 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801JD/DO (ICH10 Family) USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at 1120 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801JD/DO (ICH10 Family) USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 1140 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801JD/DO (ICH10 Family) USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 22
I/O ports at 1160 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 82801JD/DO (ICH10 Family) USB2 EHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 22
Memory at f0527000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller (rev 02)
Subsystem: Hewlett-Packard Company 82801JD/DO (ICH10 Family) HD Audio Controller
Flags: bus master, fast devsel, latency 0, IRQ 34
Memory at f0520000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 28
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f8000000-f81fffff
Prefetchable memory behind bridge: 00000000f8200000-00000000f83fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 5 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 29
Bus: primary=00, secondary=30, subordinate=30, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f8400000-f85fffff
Prefetchable memory behind bridge: 00000000f8600000-00000000f87fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801JD/DO (ICH10 Family) USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at 1180 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801JD/DO (ICH10 Family) USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 11a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company 82801JD/DO (ICH10 Family) USB UHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 22
I/O ports at 11c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 82801JD/DO (ICH10 Family) USB2 EHCI Controller
Flags: bus master, medium devsel, latency 0, IRQ 20
Memory at f0528000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation 82801JDO (ICH10DO) LPC Interface Controller (rev 02)
Subsystem: Hewlett-Packard Company 82801JDO (ICH10DO) LPC Interface Controller
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 82801JD/DO (ICH10 Family) SATA AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company 82801JD/DO (ICH10 Family) SATA AHCI Controller
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 31
I/O ports at 1250 [size=8]
I/O ports at 1268 [size=4]
I/O ports at 1258 [size=8]
I/O ports at 126c [size=4]
I/O ports at 11e0 [size=32]
Memory at f0526000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
lspci
. If it is not shown there, then there is no Nvidia adapter, or it is disabled in BIOS. You can't fix it by installing drivers. – Pilot6 May 18 '17 at 16:07PCI Settings
, theVGA controller
has 4 optionsIRQ0, IRQ5, IRQ10, IRQ11
. I don't know what those are or should I change the value – whatever May 18 '17 at 16:15VGA Controller
is actuallyIntel VGA Controller
. There's alsoDisable option
. I tried it. doesn't work. – whatever May 18 '17 at 16:23