6

In fiber optic networks, I understand CWDM technology can multiplex multiple optical signals onto a pair of fibers (or a single one).

But can a single pair of CWDM transceivers be connected directly using a pair of fibers without the use of a multiplexer/demultiplexer? Will they function like regular (non-WDM) transceivers?

If so, can the CWDM modules have mixed wavelengths provided they have full-band receivers?

Duvrai
  • 173
  • 3

1 Answers1

7

Mutiplexers arrange multiple wavelengths onto a shared fiber - they don't change the signals. So yes, if the transmitter/receiver wavelengths match you can connect two transceivers with standard patch cable. Depending on the transmission power (for 20+ km parts), attenuators might be required with short cables to avoid blinding or permanently damaging the receiver - check the spec sheet for details.

Transmitters and receivers don't even have to match exactly since most often the receiver accepts a wider wavelength range. That should also be part of the spec sheet.

If you're not very well inside the power & wavelength envelopes you should monitor the error rate to stay within your requirements.

Jeff Wheeler
  • 5,439
  • 9
  • 18
Zac67
  • 81,287
  • 3
  • 67
  • 131
  • So, not only can you pair 2 CWDM transceivers with different Tx wavelengths, I discovered you can also pair a CWDM transceiver with a standard non CWDM 1310nm transceiver for the same reason. – Duvrai Nov 07 '22 at 14:07