I know there is lot of threads about bridges and how to make them and manage them but still i haven't reached a goal.
So i need bridge between wlan and ethernet but mean while i need connect to hotspot adapter which will gain access to internet .
so basicaly scheme ir something like this
TP-LINK_M5(hotspot)<---coneection--->pc(wlan adapter)<---bridge--->pc(eth)<--cable-->voip adapter
I haven't tried with windows does it even works. Before that i tried with another tp-link router which had WDS but network died quite fast.
I know i can reach goal using packet forwarding but i am interested in this option...
Both my cards.
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:05:00.0
logical name: eth0
version: 05
serial: 24:b6:fd:13:b2:bd
size: 10Mbit/s
capacity: 100Mbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8105e-1.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s
resources: irq:52 ioport:d000(size=256) memory:f3204000-f3204fff memory:f3200000-f3203fff
*-network
description: Wireless interface
product: Centrino Wireless-N 1030 [Rainbow Peak]
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:09:00.0
logical name: wlan0
version: 34
serial: ac:72:89:35:77:08
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-24-generic firmware=18.168.6.1 ip=192.168.0.100 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn
resources: irq:54 memory:f7a00000-f7a01fff
